Advanced to version 4.2.

.gitattributes

@@ -0,0 +1 @@
+*.rst linguist-detectable

.gitignore

@@ -0,0 +1,3 @@
+build
+.idea
+make_all_sync

02-enter.rst

@@ -1,28 +0,0 @@
-進入系統
-========
-
-由校務行政入口網登入後，即可由中間「應用系統」區，找到「問卷調查平台」
-進入。
-
-.. figure:: images/02-iportal.png
-    :alt: 校務行政入口網
-    :scale: 60%
-
-    校務行政資訊入口網
-
-進入後，從左邊「建立一個新問卷」點進去，就可以建立新問卷了。
-
-.. figure:: images/02-start-02.png
-    :alt: LimeSurvey 登入後畫面
-    :scale: 60%
-
-    LimeSurvey 登入後畫面
-
-如果之前沒有建立任何問卷，系統會提醒您建立新問卷。
-
-.. figure:: images/02-start-01.png
-    :alt: 第一次登入 LimeSurvey 提醒建立新問卷
-    :scale: 60%
-
-    第一次登入 LimeSurvey 提醒建立新問卷
-

03-02-01-edit-group.rst

@@ -1,29 +0,0 @@
-修改範例題組名稱
-################
-
-在問卷編輯頁面上，點選左側欄上方的「Structure」，在左側欄顯示問卷架構
-。點選左側欄的預設範例題組「My First Question Group」，進入題組頁面。
-
-.. figure:: images/03-02-01-edit-group-01.png
-    :alt: 從左側欄的問卷架構，選擇要編輯的題組
-    :scale: 60%
-
-    從左側欄的問卷架構，選擇要編輯的題組
-
-在題組頁面中，按上方的「 :index:`編輯目前題組 <pair: 題組; 編輯>` 」
-編輯。
-
-.. figure:: images/03-02-01-edit-group-02.png
-    :alt: 題組頁面，按「編輯目前題組」編輯
-    :scale: 60%
-
-    題組頁面，按「編輯目前題組」編輯
-
-在標題處填上「壹、基本資料」，然後按右上角的「儲存並關閉」。你也可以在
-描述的欄位裡，撰寫一些說明。
-
-.. figure:: images/03-02-01-edit-group-03.png
-    :alt: 題組編輯畫面
-    :scale: 60%
-
-    題組編輯畫面

03-02-04-date.rst

@@ -1,27 +0,0 @@
-第二個問題：日期
-################
-
-接著要問填答者的出生年月日。
-
-在新增問卷問題的編輯頁面上，編號填上「q02」，問題填上
-「2.請選擇您的出生年月日。」題型選擇「其他類型問題」裏的
-「 :index:`日期時間 <題型; 日期>` 」，開啟「必須回應」，
-然後按「儲存」。
-
-.. figure:: images/03-02-04-date-01.png
-    :alt: 問題二：日期問題
-    :scale: 60%
-
-    問題二：日期問題
-
-.. figure:: images/03-02-04-date-02.png
-    :alt: 選擇日期題型
-    :scale: 60%
-
-    選擇日期題型
-
-.. figure:: images/03-02-04-date-03.png
-    :alt: 日期問題預覽
-    :scale: 60%
-
-    日期問題預覽

03-02-05-single.rst

@@ -1,103 +0,0 @@
-第三個問題：單選
-################
-
-第三個問題我們要問填答者的年級。
-
-:index:`單選 <題型; 單選>` 是最常見的題型之一，用在
-:index:`類別變數 <變數; 類別>` ，可以使用「列表（下拉式）」或
-「列表（單選）」。
-
-一般學生從大一到大四。不過延畢有可能大五或大六，醫學系會到大七、大八、
-大九。我們提供大一到大四，四個選項，並且多一個「其他」選項讓使用者自己
-填寫。
-
-在新增問卷問題的編輯頁面上，編號填上「q03」，問題填上
-「3.請選擇您的年級。」題型選擇「單選問題」裏的「列表（單選）」，開啟
-「選項『其他』」和「必須回應」。
-
-.. figure:: images/03-02-05-single-01.png
-    :alt: 問題三：單選問題
-    :scale: 60%
-
-    問題三：單選問題
-
-.. figure:: images/03-02-05-single-02.png
-    :alt: 選擇單選題型
-    :scale: 60%
-
-    選擇單選題型
-
-往下拉找到「邏輯」展開，點按開啟「『其他：』必填的評論」。答題選擇其他
-時，必須填上幾年級。
-
-.. figure:: images/03-02-05-single-03.png
-    :alt: 展開「邏輯」設定
-    :scale: 60%
-
-    展開「邏輯」設定
-
-.. figure:: images/03-02-05-single-04.png
-    :alt: 開啟單選題「『其他：』必填的評論」
-    :scale: 60%
-
-    開啟單選題「『其他：』必填的評論」
-
-按右上角「儲存」。
-
-建好問題後，會提醒你還沒輸入選項：
-「You need to add answer options to this question」。可以直接點選
-「You need to add answer options to this question」進入，也可由上方
-「編輯答案選項」進入，輸入選項。
-
-.. figure:: images/03-02-05-single-05.png
-    :alt: 建好單選題後，輸入選項
-    :scale: 60%
-
-    建好單選題後，輸入選項
-
-可以一筆一筆輸入。每輸完一筆選項，按右邊的加號，新增一個選項。
-
-.. figure:: images/03-02-05-single-06.png
-    :alt: 一筆一筆輸入選項
-    :scale: 60%
-
-    一筆一筆輸入選項
-
-或是由下方「快速增加」一次輸入所有選項。
-
-.. figure:: images/03-02-05-single-07.png
-    :alt: 按「快速增加」一次輸入所有選項
-    :scale: 60%
-
-    按「快速增加」一次輸入所有選項
-
-快速增加選項時，請一行填寫一個選項。可以由剪貼簿複製貼上。我們輸入一年
-級到四年級，共四行::
-
-    一年級
-    二年級
-    三年級
-    四年級
-
-全部選項填寫完後，按下方的「替換」使用我們填寫的選項。（如果按「增加」
-，會加在現有選項後面。）
-
-.. figure:: images/03-02-05-single-08.png
-    :alt: 一次輸入所有選項
-    :scale: 60%
-
-    一次輸入所有選項
-
-完成後按「儲存並關閉」。
-
-.. figure:: images/03-02-05-single-09.png
-    :alt: 填寫完選項後儲存關閉
-    :scale: 60%
-
-    填寫完選項後儲存關閉
-
-.. figure:: images/03-02-05-single-11.png
-    :alt: 單選問題預覽
-    :scale: 60%
-
-    單選問題預覽

03-03-01-number.rst

@@ -1,52 +0,0 @@
-第四個問題：數值
-################
-
-接下來我們要問填答者每天回家後唸書多久，瞭解學生下課後，還付出多少時間
-唸書。
-
-:index:`數值 <題型; 數值>` 是另一種常見的題型，用在
-:index:`連續變數 <變數; 連續>` 上。
-
-唸書時間最少0小時（沒唸書），最多扣掉上課和睡覺時間，只會有十幾個小時
-。為方便起見，我們當作最多24小時。
-
-我們也可以用0–24共25個選項的單選欄位。不過有人會有3.5、2.25小時等等非
-整數，所以我們還是使用數值欄位。
-
-在新增問卷問題的編輯頁面上，編號填上「q04」，問題填上
-「4.請問您每天放學後唸書幾個小時？」題型選擇「其他類型問題」裏的
-「數值輸入」，題組選「貳、課後評量」，開啟「必須回應」。
-
-.. figure:: images/03-03-01-number-01.png
-    :alt: 問題四：數值題目
-    :scale: 60%
-
-    問題四：數值題目
-
-.. figure:: images/03-03-01-number-02.png
-    :alt: 選擇數值題型
-    :scale: 60%
-
-    選擇數值題型
-
-往下拉找到「輸入」展開。每天最多24小時，最少0小時，為免填錯，可以限制
-輸入值的範圍。請在最小值填上0，最大值填上24。因為可能會有3.5小時，不開
-啟「只能整數」。最後回到右上角按「儲存」。
-
-.. figure:: images/03-03-01-number-03.png
-    :alt: 展開「輸入」設定
-    :scale: 60%
-
-    展開「輸入」設定
-
-.. figure:: images/03-03-01-number-04.png
-    :alt: 限制數值填答範圍
-    :scale: 60%
-
-    限制數值填答範圍
-
-.. figure:: images/03-03-01-number-05.png
-    :alt: 數值題目預覽
-    :scale: 60%
-
-    數值題目預覽

03-03-02-multi-numbers.rst

@@ -1,83 +0,0 @@
-第五個問題：多重數值
-####################
-
-接下來我們想瞭解學生周間每天上網時間。
-
-「 :index:`多重數值 <題型; 多重數值>`」欄位和「數值」欄位很像，不過可
-以輸入一系列的數字，適合用在一系列同性質的數字上，例如周間每天上網時數
-、每天唸書時數、每天支出…等等。
-
-每天的上網時間最少0小時，最多24小時，同樣可以容許小數點。
-
-在新增問卷問題的編輯頁面上，編號填上「q05」，問題填上
-「5.過去七天每天上網幾小時？」題型選擇「其他類型問題」裏的
-「多重數值輸入」，題組選「貳、課後評量」，開啟「必須回應」。
-
-.. figure:: images/03-03-02-multi-numbers-01.png
-    :alt: 問題五：多重數值題目
-    :scale: 60%
-
-    問題五：多重數值題目
-
-.. figure:: images/03-03-02-multi-numbers-02.png
-    :alt: 選擇多重數值題型
-    :scale: 60%
-
-    選擇多重數值題型
-
-往下拉找到「輸入」展開。請在最小值填上0，最大值填上24。因為可能會有
-3.5小時，不開啟「只能整數」。最後按「儲存」。
-
-.. figure:: images/03-03-02-multi-numbers-03.png
-    :alt: 展開「輸入」設定
-    :scale: 60%
-
-    展開「輸入」設定
-
-.. figure:: images/03-03-02-multi-numbers-04.png
-    :alt: 限制數值填答範圍
-    :scale: 60%
-
-    限制數值填答範圍
-
-建好問題後，會提醒你還沒輸入子問題：
-「You need to add subquestions to this question」。可以直接點選
-「You need to add subquestions to this question」進入，也可由上方
-「編輯子問題」進入，輸入子問題。
-
-.. figure:: images/03-03-02-multi-numbers-05.png
-    :alt: 建好多重數值題型後，輸入子問題
-    :scale: 60%
-
-    建好多重數值題型後，輸入子問題
-
-子問題畫面和單選選項畫面一樣。我們點「快速增加」進入。輸入星期一到星期
-日，共七行::
-
-    星期一
-    星期二
-    星期三
-    星期四
-    星期五
-    星期六
-    星期日
-
-然後按「替換」。按右上方「儲存並關閉」。
-
-.. figure:: images/03-03-02-multi-numbers-06.png
-    :alt: 按「快速增加」一次輸入所有子問題
-    :scale: 60%
-
-    按「快速增加」一次輸入所有子問題
-
-.. figure:: images/03-03-02-multi-numbers-07.png
-    :alt: 輸入所有子問題
-    :scale: 60%
-
-    輸入所有子問題
-
-.. figure:: images/03-03-02-multi-numbers-08.png
-    :alt: 多重數值題目預覽
-    :scale: 60%
-
-    多重數值題目預覽

03-03-04-order.rst

@@ -1,61 +0,0 @@
-第七個問題：排序
-################
-
-我們想知道學生對課程專題的喜好順序。
-
-:index:`排序欄位 <題型; 排序>` 有很多種用途，可以用來詢問態度喜好的順
-序，也可用在社會網路分析中，詢問人際親疏的順序。
-
-在新增問卷問題的編輯頁面上，編號填上「q07」，問題填上
-「7.請依序選擇您喜歡的單元。」題型選擇「其他類型問題」裏的「排序」，
-題組選「貳、課後評量」，開啟「必須回應」，然後按「儲存」。
-
-.. figure:: images/03-03-04-order-01.png
-    :alt: 問題七：排序題目
-    :scale: 60%
-
-    問題七：排序題目
-
-.. figure:: images/03-03-04-order-02.png
-    :alt: 選擇排序題型
-    :scale: 60%
-
-    選擇排序題型
-
-建立問題後，按「編輯答案選項」輸入各課程單元。
-
-.. figure:: images/03-03-04-order-03.png
-    :alt: 建好排序題型後，輸入排序項目
-    :scale: 60%
-
-    建好排序題型後，輸入排序項目
-
-加上下列課程單元::
-
-    小豆芽觀察日記
-    閃爍的星星
-    我家附近的神明
-    爺爺奶奶的故事
-    神奇機器人
-
-.. figure:: images/03-03-04-order-04.png
-    :alt: 輸入所有排序項目
-    :scale: 60%
-
-    輸入所有排序項目
-
-.. figure:: images/03-03-04-order-05.png
-    :alt: 排序題目預覽
-    :scale: 60%
-
-    排序題目預覽
-
-左邊是現有的課程單元，右邊是排序的結果。依偏好順序，用滑鼠在左邊的課程
-單元點兩下，或用滑鼠拖拉到右邊，就可以加到右邊的排序結果中。也可以用滑
-鼠拖拉，調整各個課程單元的順序。
-
-.. figure:: images/03-03-04-order-06.png
-    :alt: 用滑鼠拖拉調整順序
-    :scale: 60%
-
-    用滑鼠拖拉調整順序

03-04-02-id.rst

@@ -1,62 +0,0 @@
-第九個問題：本校生的學號
-########################
-
-如果是台師大的學生，請同學填上學號。
-
-在新增問卷問題的編輯頁面上，編號填上「q09」，問題填上
-「9.請填上您的學號。」題型選擇「開放性問題」裏的
-「 :index:`自由短文 <題型; 單行文字>` 」，題組選「參、其他」，開啟
-「必須回應」，然後按「儲存」。
-
-.. figure:: images/03-04-02-id-01.png
-    :alt: 問題九：本校生的學號
-    :scale: 60%
-
-    問題九：本校生的學號
-
-.. figure:: images/03-04-02-id-02.png
-    :alt: 選擇自由短文題型
-    :scale: 60%
-
-    選擇自由短文題型
-
-按上方「Set conditions」設定問題的條件。
-
-.. figure:: images/03-04-02-id-03.png
-    :alt: 按上方「Set conditions」設定問題條件。
-    :scale: 60%
-
-    按上方「Set conditions」設定問題條件。
-
-接著往下拉到頁面下方「增加條件」的地方，問題選剛剛的第八題
-「q08: 8.您是不是台師大學生？」答案選「Y(是)」，然後按下「增加條件」。
-
-.. figure:: images/03-04-02-id-04.png
-    :alt: 加上問題的條件
-    :scale: 60%
-
-    加上問題的條件
-
-回到頁面上方，剛剛設的條件已經加上去了：
-
-    q08: 8.您是不是台師大學生 等於 是(Y)
-
-我們按上方的「關閉」。
-
-.. figure:: images/03-04-02-id-05.png
-    :alt: 設好的問題條件
-    :scale: 60%
-
-    設好的問題條件
-
-回到問題的頁面，可以看到問題的「Relevance equation:」已經設為：
-
-    ((q08.NAOK == "Y"))
-
-問題的條件設定好了。
-
-.. figure:: images/03-04-02-id-06.png
-    :alt: 問題的條件
-    :scale: 60%
-
-    問題的條件

03-04-03-school.rst

@@ -1,70 +0,0 @@
-第十、十一個問題：外校生的校系
-##############################
-
-如果是外校生，請同學填上學校和科系。
-
-在新增問卷問題的編輯頁面上，編號填上「q10」，問題填上
-「10.請填上您就讀的學校。」題型選擇「開放性問題」裏的
-「 :index:`自由短文 <題型; 單行文字>` 」，題組選「參、其他」，開啟
-「必須回應」，然後按「儲存」。
-
-.. figure:: images/03-04-03-school-01.png
-    :alt: 問題十：外校生的就讀學校
-    :scale: 60%
-
-    問題十：外校生的就讀學校
-
-接著按上方「Set conditions」設定問題的條件。在設定問題條件的頁面上，往
-下拉到頁面下方「增加條件」的地方，問題選剛剛的第八題
-「q08: 8.您是不是台師大學生？」答案選「N(否)」，然後按下「增加條件」。
-
-.. figure:: images/03-04-03-school-02.png
-    :alt: 加上外校生就讀學校問題的條件
-    :scale: 60%
-
-    加上外校生就讀學校問題的條件
-
-回到頁面上方，剛剛設的條件已經加上去了：
-
-    q08: 8.您是不是台師大學生 等於 否(N)
-
-我們按上方的「關閉」。
-
-.. figure:: images/03-04-03-school-03.png
-    :alt: 設好的外校生就讀學校問題條件
-    :scale: 60%
-
-    設好的外校生就讀學校問題條件
-
-再一次，在新增問卷問題的編輯頁面上，編號填上「q11」，問題填上
-「11.請填上您就讀的科系。」題型選擇「開放性問題」裏的
-「 :index:`自由短文 <題型; 單行文字>` 」，題組選「參、其他」，開啟
-「必須回應」，然後按「儲存」。
-
-.. figure:: images/03-04-03-school-04.png
-    :alt: 問題十一：外校生的就讀科系
-    :scale: 60%
-
-    問題十一：外校生的就讀科系
-
-接著按上方「Set conditions」設定問題的條件。在設定問題條件的頁面上，往
-下拉到頁面下方「增加條件」的地方，問題選剛剛的第八題
-「q08: 8.您是不是台師大學生？」答案選「N(否)」，然後按下「增加條件」。
-
-.. figure:: images/03-04-03-school-05.png
-    :alt: 加上外校生就讀科系問題的條件
-    :scale: 60%
-
-    加上外校生就讀科系問題的條件
-
-回到頁面上方，剛剛設的條件已經加上去了：
-
-    q08: 8.您是不是台師大學生 等於 否(N)
-
-我們按上方的「關閉」。
-
-.. figure:: images/03-04-03-school-06.png
-    :alt: 設好的外校生就讀科系問題條件
-    :scale: 60%
-
-    設好的外校生就讀科系問題條件

03-04-04-comment.rst

@@ -1,23 +0,0 @@
-第十二個問題：自由長答
-######################
-
-問卷最後我們請填答者給我們課程的建議，告訴我們問卷沒有問到的感想。
-
-課程建議題型使用「 :index:`自由長答 <題型; 多行文字>` 」。填答者不一定
-非給建議不可，不是必答。自由長答的內文可以做質性分析。
-
-在新增問卷問題的編輯頁面上，編號填上「q12」，問題填上
-「12.您若有對課程的任何建議，請告訴我們。」題型選擇「開放性問題」裏的
-「自由長答」，題組選「參、其他」，不要開啟「必須回應」，然後按「儲存」。
-
-.. figure:: images/03-04-04-comment-01.png
-    :alt: 問題十二：自由長答題
-    :scale: 60%
-
-    問題十二：自由長答題
-
-.. figure:: images/03-04-04-comment-02.png
-    :alt: 選擇自由長答題型
-    :scale: 60%
-
-    選擇自由長答題型

03-04-05-preview.rst

@@ -1,35 +0,0 @@
-預覽問卷的條件邏輯
-##################
-
-題組三的跳題設定好了。我們 :index:`預覽一下題組三 <預覽; 題組>`，看問
-卷有沒有正確跳題。
-
-按一下上方的「Preview question group」預覽題組。
-
-.. figure:: images/03-04-05-preview-01.png
-    :alt: 按下「Preview question group」預覽題組
-    :scale: 60%
-
-    按下「Preview question group」預覽題組
-
-.. figure:: images/03-04-05-preview-02.png
-    :alt: 題組預覽
-    :scale: 60%
-
-    題組預覽
-
-第八題選「是」（本校生），才會出現第九題詢問本校生的學號。
-
-.. figure:: images/03-04-05-preview-03.png
-    :alt: 第八題選「是」（本校生），接到第九題詢問本校生學號
-    :scale: 60%
-
-    第八題選「是」（本校生），接到第九題詢問本校生的學號
-
-第八題選「否」（外校生），才會出現第十題、第十一題詢問外校生的校系。
-
-.. figure:: images/03-04-05-preview-04.png
-    :alt: 第八題選「否」（本校生），接到第十題、第十一題詢問外校生校系
-    :scale: 60%
-
-    第八題選「否」（本校生），接到第十題、第十一題詢問外校生校系

04-03-01-participants.rst

@@ -1,73 +0,0 @@
-填答者名單
-##########
-
-建立封閉式問卷後，下一步要建立填答者名單。從問卷左側欄「設定」分頁下，
-「問卷參與者」進入後，點選上方選單「顯示參與者」。
-
-.. figure:: images/04-03-01-participants-01.png
-    :alt: 左側欄「設定」裏的「問卷參與者」
-    :scale: 60%
-
-    左側欄「設定」裏的「問卷參與者」
-
-.. figure:: images/04-03-01-participants-02.png
-    :alt: 點選「顯示參與者」
-    :scale: 60%
-
-    點選「顯示參與者」
-
-目前名單還是空的。從左上角按下「建立」，可以增添新的填答者。
-
-.. figure:: images/04-03-01-participants-03.png
-    :alt: 點選「建立」加上新的填答者
-    :scale: 60%
-
-    點選「建立」加上新的填答者
-
-選按「加入參與者」，就可以一筆一筆輸入填答者資料。
-
-.. figure:: images/04-03-01-participants-04.png
-    :alt: 選「建立」「加入參與者」輸入填答者資料
-    :scale: 60%
-
-    選「建立」「加入參與者」輸入填答者資料
-
-填上First name（名）、Last name（姓）和郵件信箱，按右上角「儲存」
-即可。Token（ :index:`邀請碼 <邀請碼; 填寫>` ）可留白，系統自動產生亂
-數邀請碼。也可以使用身份證字號、學號等對方容易記憶的邀請碼，
-只要不重複即可。
-
-.. figure:: images/04-03-01-participants-05.png
-    :alt: 輸入填答者資料
-    :scale: 60%
-
-    輸入填答者資料
-
-選按「CSV檔案」，可從CSV檔整批匯入填答者名單。
-
-.. figure:: images/04-03-01-participants-06.png
-    :alt: 選「建立」「CSV檔案」從CSV檔匯入填答者名單
-    :scale: 60%
-
-    選「建立」「CSV檔案」從CSV檔匯入填答者名單
-
-CSV檔欄位如下：
-
-- firstname（名）
-- lastname（姓）
-- email（郵件信箱）
-- （選填）token（邀請碼）
-
-.. figure:: images/04-03-01-participants-07.png
-    :alt: 選「建立」「CSV檔案」從CSV檔匯入填答者名單
-    :scale: 60%
-
-    選「建立」「CSV檔案」從CSV檔匯入填答者名單
-
-可以參閱 `填答者CSV檔的範例 <http://limesurvey.iro.ntnu.edu.tw/learning/participants-example.csv>`_ 。
-
-.. figure:: images/04-03-01-participants-08.png
-    :alt: 填答者CSV檔範例
-    :scale: 60%
-
-    填答者CSV檔範例

04-03-closed.rst

@@ -1,37 +0,0 @@
-封閉式問卷
-----------
-
-:index:`封閉式問卷 <問卷; 封閉式>` ，需要有填答者名單，適用於施測者握
-有特定填答者名單時。如：
-
-- 教學實驗後，實驗組與對照組的學生。
-- 由校友資料庫取得名單的畢業生。
-- 管理學院所有專兼任教師。
-- …等等。
-
-封閉式問卷需要額外設定填答者名單。名單上的填答者，需有
-:index:`邀請碼 <邀請碼>` 才可填答。每個填答者的邀請碼各自不同。
-
-啟用問卷後，詢問是否要封閉式問卷時，按左下角的「切換至封閉問卷模式」
-即可。
-
-.. figure:: images/04-03-close-01.png
-    :alt: 選擇封閉式問卷
-    :scale: 60%
-
-    選擇封閉式問卷
-
-詢問是否要開新空白填答者名單時，請點選左下角
-「Initialise participant table」。
-
-.. figure:: images/04-03-close-02.png
-    :alt: 開新空白填答者名單
-    :scale: 60%
-
-    開新空白填答者名單
-
-
-.. toctree::
-
-    04-03-01-participants
-    04-03-02-messages

LICENSE

@@ -0,0 +1,396 @@
+Attribution 4.0 International
+
+=======================================================================
+
+Creative Commons Corporation ("Creative Commons") is not a law firm and
+does not provide legal services or legal advice. Distribution of
+Creative Commons public licenses does not create a lawyer-client or
+other relationship. Creative Commons makes its licenses and related
+information available on an "as-is" basis. Creative Commons gives no
+warranties regarding its licenses, any material licensed under their
+terms and conditions, or any related information. Creative Commons
+disclaims all liability for damages resulting from their use to the
+fullest extent possible.
+
+Using Creative Commons Public Licenses
+
+Creative Commons public licenses provide a standard set of terms and
+conditions that creators and other rights holders may use to share
+original works of authorship and other material subject to copyright
+and certain other rights specified in the public license below. The
+following considerations are for informational purposes only, are not
+exhaustive, and do not form part of our licenses.
+
+     Considerations for licensors: Our public licenses are
+     intended for use by those authorized to give the public
+     permission to use material in ways otherwise restricted by
+     copyright and certain other rights. Our licenses are
+     irrevocable. Licensors should read and understand the terms
+     and conditions of the license they choose before applying it.
+     Licensors should also secure all rights necessary before
+     applying our licenses so that the public can reuse the
+     material as expected. Licensors should clearly mark any
+     material not subject to the license. This includes other CC-
+     licensed material, or material used under an exception or
+     limitation to copyright. More considerations for licensors:
+    wiki.creativecommons.org/Considerations_for_licensors
+
+     Considerations for the public: By using one of our public
+     licenses, a licensor grants the public permission to use the
+     licensed material under specified terms and conditions. If
+     the licensor's permission is not necessary for any reason--for
+     example, because of any applicable exception or limitation to
+     copyright--then that use is not regulated by the license. Our
+     licenses grant only permissions under copyright and certain
+     other rights that a licensor has authority to grant. Use of
+     the licensed material may still be restricted for other
+     reasons, including because others have copyright or other
+     rights in the material. A licensor may make special requests,
+     such as asking that all changes be marked or described.
+     Although not required by our licenses, you are encouraged to
+     respect those requests where reasonable. More considerations
+     for the public:
+    wiki.creativecommons.org/Considerations_for_licensees
+
+=======================================================================
+
+Creative Commons Attribution 4.0 International Public License
+
+By exercising the Licensed Rights (defined below), You accept and agree
+to be bound by the terms and conditions of this Creative Commons
+Attribution 4.0 International Public License ("Public License"). To the
+extent this Public License may be interpreted as a contract, You are
+granted the Licensed Rights in consideration of Your acceptance of
+these terms and conditions, and the Licensor grants You such rights in
+consideration of benefits the Licensor receives from making the
+Licensed Material available under these terms and conditions.
+
+
+Section 1 -- Definitions.
+
+  a. Adapted Material means material subject to Copyright and Similar
+     Rights that is derived from or based upon the Licensed Material
+     and in which the Licensed Material is translated, altered,
+     arranged, transformed, or otherwise modified in a manner requiring
+     permission under the Copyright and Similar Rights held by the
+     Licensor. For purposes of this Public License, where the Licensed
+     Material is a musical work, performance, or sound recording,
+     Adapted Material is always produced where the Licensed Material is
+     synched in timed relation with a moving image.
+
+  b. Adapter's License means the license You apply to Your Copyright
+     and Similar Rights in Your contributions to Adapted Material in
+     accordance with the terms and conditions of this Public License.
+
+  c. Copyright and Similar Rights means copyright and/or similar rights
+     closely related to copyright including, without limitation,
+     performance, broadcast, sound recording, and Sui Generis Database
+     Rights, without regard to how the rights are labeled or
+     categorized. For purposes of this Public License, the rights
+     specified in Section 2(b)(1)-(2) are not Copyright and Similar
+     Rights.
+
+  d. Effective Technological Measures means those measures that, in the
+     absence of proper authority, may not be circumvented under laws
+     fulfilling obligations under Article 11 of the WIPO Copyright
+     Treaty adopted on December 20, 1996, and/or similar international
+     agreements.
+
+  e. Exceptions and Limitations means fair use, fair dealing, and/or
+     any other exception or limitation to Copyright and Similar Rights
+     that applies to Your use of the Licensed Material.
+
+  f. Licensed Material means the artistic or literary work, database,
+     or other material to which the Licensor applied this Public
+     License.
+
+  g. Licensed Rights means the rights granted to You subject to the
+     terms and conditions of this Public License, which are limited to
+     all Copyright and Similar Rights that apply to Your use of the
+     Licensed Material and that the Licensor has authority to license.
+
+  h. Licensor means the individual(s) or entity(ies) granting rights
+     under this Public License.
+
+  i. Share means to provide material to the public by any means or
+     process that requires permission under the Licensed Rights, such
+     as reproduction, public display, public performance, distribution,
+     dissemination, communication, or importation, and to make material
+     available to the public including in ways that members of the
+     public may access the material from a place and at a time
+     individually chosen by them.
+
+  j. Sui Generis Database Rights means rights other than copyright
+     resulting from Directive 96/9/EC of the European Parliament and of
+     the Council of 11 March 1996 on the legal protection of databases,
+     as amended and/or succeeded, as well as other essentially
+     equivalent rights anywhere in the world.
+
+  k. You means the individual or entity exercising the Licensed Rights
+     under this Public License. Your has a corresponding meaning.
+
+
+Section 2 -- Scope.
+
+  a. License grant.
+
+       1. Subject to the terms and conditions of this Public License,
+          the Licensor hereby grants You a worldwide, royalty-free,
+          non-sublicensable, non-exclusive, irrevocable license to
+          exercise the Licensed Rights in the Licensed Material to:
+
+            a. reproduce and Share the Licensed Material, in whole or
+               in part; and
+
+            b. produce, reproduce, and Share Adapted Material.
+
+       2. Exceptions and Limitations. For the avoidance of doubt, where
+          Exceptions and Limitations apply to Your use, this Public
+          License does not apply, and You do not need to comply with
+          its terms and conditions.
+
+       3. Term. The term of this Public License is specified in Section
+          6(a).
+
+       4. Media and formats; technical modifications allowed. The
+          Licensor authorizes You to exercise the Licensed Rights in
+          all media and formats whether now known or hereafter created,
+          and to make technical modifications necessary to do so. The
+          Licensor waives and/or agrees not to assert any right or
+          authority to forbid You from making technical modifications
+          necessary to exercise the Licensed Rights, including
+          technical modifications necessary to circumvent Effective
+          Technological Measures. For purposes of this Public License,
+          simply making modifications authorized by this Section 2(a)
+          (4) never produces Adapted Material.
+
+       5. Downstream recipients.
+
+            a. Offer from the Licensor -- Licensed Material. Every
+               recipient of the Licensed Material automatically
+               receives an offer from the Licensor to exercise the
+               Licensed Rights under the terms and conditions of this
+               Public License.
+
+            b. No downstream restrictions. You may not offer or impose
+               any additional or different terms or conditions on, or
+               apply any Effective Technological Measures to, the
+               Licensed Material if doing so restricts exercise of the
+               Licensed Rights by any recipient of the Licensed
+               Material.
+
+       6. No endorsement. Nothing in this Public License constitutes or
+          may be construed as permission to assert or imply that You
+          are, or that Your use of the Licensed Material is, connected
+          with, or sponsored, endorsed, or granted official status by,
+          the Licensor or others designated to receive attribution as
+          provided in Section 3(a)(1)(A)(i).
+
+  b. Other rights.
+
+       1. Moral rights, such as the right of integrity, are not
+          licensed under this Public License, nor are publicity,
+          privacy, and/or other similar personality rights; however, to
+          the extent possible, the Licensor waives and/or agrees not to
+          assert any such rights held by the Licensor to the limited
+          extent necessary to allow You to exercise the Licensed
+          Rights, but not otherwise.
+
+       2. Patent and trademark rights are not licensed under this
+          Public License.
+
+       3. To the extent possible, the Licensor waives any right to
+          collect royalties from You for the exercise of the Licensed
+          Rights, whether directly or through a collecting society
+          under any voluntary or waivable statutory or compulsory
+          licensing scheme. In all other cases the Licensor expressly
+          reserves any right to collect such royalties.
+
+
+Section 3 -- License Conditions.
+
+Your exercise of the Licensed Rights is expressly made subject to the
+following conditions.
+
+  a. Attribution.
+
+       1. If You Share the Licensed Material (including in modified
+          form), You must:
+
+            a. retain the following if it is supplied by the Licensor
+               with the Licensed Material:
+
+                 i. identification of the creator(s) of the Licensed
+                    Material and any others designated to receive
+                    attribution, in any reasonable manner requested by
+                    the Licensor (including by pseudonym if
+                    designated);
+
+                ii. a copyright notice;
+
+               iii. a notice that refers to this Public License;
+
+                iv. a notice that refers to the disclaimer of
+                    warranties;
+
+                 v. a URI or hyperlink to the Licensed Material to the
+                    extent reasonably practicable;
+
+            b. indicate if You modified the Licensed Material and
+               retain an indication of any previous modifications; and
+
+            c. indicate the Licensed Material is licensed under this
+               Public License, and include the text of, or the URI or
+               hyperlink to, this Public License.
+
+       2. You may satisfy the conditions in Section 3(a)(1) in any
+          reasonable manner based on the medium, means, and context in
+          which You Share the Licensed Material. For example, it may be
+          reasonable to satisfy the conditions by providing a URI or
+          hyperlink to a resource that includes the required
+          information.
+
+       3. If requested by the Licensor, You must remove any of the
+          information required by Section 3(a)(1)(A) to the extent
+          reasonably practicable.
+
+       4. If You Share Adapted Material You produce, the Adapter's
+          License You apply must not prevent recipients of the Adapted
+          Material from complying with this Public License.
+
+
+Section 4 -- Sui Generis Database Rights.
+
+Where the Licensed Rights include Sui Generis Database Rights that
+apply to Your use of the Licensed Material:
+
+  a. for the avoidance of doubt, Section 2(a)(1) grants You the right
+     to extract, reuse, reproduce, and Share all or a substantial
+     portion of the contents of the database;
+
+  b. if You include all or a substantial portion of the database
+     contents in a database in which You have Sui Generis Database
+     Rights, then the database in which You have Sui Generis Database
+     Rights (but not its individual contents) is Adapted Material; and
+
+  c. You must comply with the conditions in Section 3(a) if You Share
+     all or a substantial portion of the contents of the database.
+
+For the avoidance of doubt, this Section 4 supplements and does not
+replace Your obligations under this Public License where the Licensed
+Rights include other Copyright and Similar Rights.
+
+
+Section 5 -- Disclaimer of Warranties and Limitation of Liability.
+
+  a. UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE
+     EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS
+     AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF
+     ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS,
+     IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION,
+     WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
+     PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS,
+     ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT
+     KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT
+     ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+  b. TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE
+     TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
+     NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT,
+     INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES,
+     COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR
+     USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN
+     ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR
+     DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR
+     IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+  c. The disclaimer of warranties and limitation of liability provided
+     above shall be interpreted in a manner that, to the extent
+     possible, most closely approximates an absolute disclaimer and
+     waiver of all liability.
+
+
+Section 6 -- Term and Termination.
+
+  a. This Public License applies for the term of the Copyright and
+     Similar Rights licensed here. However, if You fail to comply with
+     this Public License, then Your rights under this Public License
+     terminate automatically.
+
+  b. Where Your right to use the Licensed Material has terminated under
+     Section 6(a), it reinstates:
+
+       1. automatically as of the date the violation is cured, provided
+          it is cured within 30 days of Your discovery of the
+          violation; or
+
+       2. upon express reinstatement by the Licensor.
+
+     For the avoidance of doubt, this Section 6(b) does not affect any
+     right the Licensor may have to seek remedies for Your violations
+     of this Public License.
+
+  c. For the avoidance of doubt, the Licensor may also offer the
+     Licensed Material under separate terms or conditions or stop
+     distributing the Licensed Material at any time; however, doing so
+     will not terminate this Public License.
+
+  d. Sections 1, 5, 6, 7, and 8 survive termination of this Public
+     License.
+
+
+Section 7 -- Other Terms and Conditions.
+
+  a. The Licensor shall not be bound by any additional or different
+     terms or conditions communicated by You unless expressly agreed.
+
+  b. Any arrangements, understandings, or agreements regarding the
+     Licensed Material not stated herein are separate from and
+     independent of the terms and conditions of this Public License.
+
+
+Section 8 -- Interpretation.
+
+  a. For the avoidance of doubt, this Public License does not, and
+     shall not be interpreted to, reduce, limit, restrict, or impose
+     conditions on any use of the Licensed Material that could lawfully
+     be made without permission under this Public License.
+
+  b. To the extent possible, if any provision of this Public License is
+     deemed unenforceable, it shall be automatically reformed to the
+     minimum extent necessary to make it enforceable. If the provision
+     cannot be reformed, it shall be severed from this Public License
+     without affecting the enforceability of the remaining terms and
+     conditions.
+
+  c. No term or condition of this Public License will be waived and no
+     failure to comply consented to unless expressly agreed to by the
+     Licensor.
+
+  d. Nothing in this Public License constitutes or may be interpreted
+     as a limitation upon, or waiver of, any privileges and immunities
+     that apply to the Licensor or You, including from the legal
+     processes of any jurisdiction or authority.
+
+
+=======================================================================
+
+Creative Commons is not a party to its public
+licenses. Notwithstanding, Creative Commons may elect to apply one of
+its public licenses to material it publishes and in those instances
+will be considered the “Licensor.” The text of the Creative Commons
+public licenses is dedicated to the public domain under the CC0 Public
+Domain Dedication. Except for the limited purpose of indicating that
+material is shared under a Creative Commons public license or as
+otherwise permitted by the Creative Commons policies published at
+creativecommons.org/policies, Creative Commons does not authorize the
+use of the trademark "Creative Commons" or any other trademark or logo
+of Creative Commons without its prior written consent including,
+without limitation, in connection with any unauthorized modifications
+to any of its public licenses or any other arrangements,
+understandings, or agreements concerning use of licensed material. For
+the avoidance of doubt, this paragraph does not form part of the
+public licenses.
+
+Creative Commons may be contacted at creativecommons.org.
+

Makefile

@@ -1,240 +1,20 @@
-# Makefile for Sphinx documentation
+# Minimal makefile for Sphinx documentation
 #
 
-# You can set these variables from the command line.
+# You can set these variables from the command line, and also
-SPHINXOPTS    =
+# from the environment for the first two.
-SPHINXBUILD   = sphinx-build
+SPHINXOPTS    ?=
-PAPER         =
+SPHINXBUILD   ?= sphinx-build
-BUILDDIR      = _build
+SOURCEDIR     = source
+BUILDDIR      = build
 
-# Internal variables.
+# Put it first so that "make" without argument is like "make help".
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-# My local extension
-PROJNAME		= learning-limesurvey
-PROJVER			= 3.0
-
-.PHONY: help
 help:
-	@echo "Please use \`make <target>' where <target> is one of"
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  applehelp  to make an Apple Help Book"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  epub3      to make an epub3"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-	@echo "  coverage   to run coverage check of the documentation (if enabled)"
-	@echo "  dummy      to check syntax errors of document sources"
-	@echo "  dist		to create a document source distribution"
 
-.PHONY: clean
+.PHONY: help Makefile
-clean:
-	rm -rf $(BUILDDIR)/*
 
-.PHONY: html
+# Catch-all target: route all unknown targets to Sphinx using the new
-html:
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+%: Makefile
-	@echo
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-.PHONY: dirhtml
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-.PHONY: singlehtml
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-.PHONY: pickle
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-.PHONY: json
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-.PHONY: htmlhelp
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-.PHONY: qthelp
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/LimeSurvey.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/LimeSurvey.qhc"
-
-.PHONY: applehelp
-applehelp:
-	$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
-	@echo
-	@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
-	@echo "N.B. You won't be able to view it unless you put it in" \
-	      "~/Library/Documentation/Help or install it in your application" \
-	      "bundle."
-
-.PHONY: devhelp
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/LimeSurvey"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/LimeSurvey"
-	@echo "# devhelp"
-
-.PHONY: epub
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-.PHONY: epub3
-epub3:
-	$(SPHINXBUILD) -b epub3 $(ALLSPHINXOPTS) $(BUILDDIR)/epub3
-	@echo
-	@echo "Build finished. The epub3 file is in $(BUILDDIR)/epub3."
-
-.PHONY: latex
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	patch -p 1 < $(PROJNAME).tex.patch
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-.PHONY: latexpdf
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	patch -p 1 < $(PROJNAME).tex.patch
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-.PHONY: latexpdfja
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-.PHONY: text
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-.PHONY: man
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-.PHONY: texinfo
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-.PHONY: info
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-.PHONY: gettext
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-.PHONY: changes
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-.PHONY: linkcheck
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-.PHONY: doctest
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-.PHONY: coverage
-coverage:
-	$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
-	@echo "Testing of coverage in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/coverage/python.txt."
-
-.PHONY: xml
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-.PHONY: pseudoxml
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
-
-.PHONY: dummy
-dummy:
-	$(SPHINXBUILD) -b dummy $(ALLSPHINXOPTS) $(BUILDDIR)/dummy
-	@echo
-	@echo "Build finished. Dummy builder generates no files."
-
-dist:
-	rm -rf $(BUILDDIR)/dist
-	mkdir $(BUILDDIR)/dist $(BUILDDIR)/dist/$(PROJNAME)-$(PROJVER)
-	cp -fpR *.rst images Makefile make.bat conf.py $(PROJNAME).tex.patch participants-example.csv $(BUILDDIR)/dist/$(PROJNAME)-$(PROJVER)/
-	cd $(BUILDDIR)/dist && zip -r $(PROJNAME)-$(PROJVER).zip $(PROJNAME)-$(PROJVER) && cd ../..
-	@echo
-	@echo "Build finished. The distribution is in _build/dist."

README.rst

@@ -0,0 +1,57 @@
+Learning LimeSurvey
+===================
+
+*«Learning LimeSurvey»* is a Chinese LimeSurvey_ tutorial.  It
+features `project-based learning`_:  By creating a simple yet
+practical survey, it walks through the frequently-used features of
+LimeSurvey.  It is written in reStructuredText_ with Sphinx_
+extension.
+
+*«Learning LimeSurvey»* is written by imacat_.  Read the tutorial_
+(Chinese) online, or check the `GitHub source documents`_.
+
+.. _LimeSurvey: https://www.limesurvey.org
+.. _project-based learning: https://en.wikipedia.org/wiki/Project-based_learning
+.. _reStructuredText: https://docutils.sourceforge.io/rst.html
+.. _Sphinx: https://www.sphinx-doc.org
+.. _imacat: imacat@mail.imacat.idv.tw
+.. _tutorial: https://limesurvey.imacat.idv.tw/learning/
+.. _GitHub source documents: https://github.com/imacat/learning-limesurvey
+
+
+HTML, PDF, and Other Formats
+----------------------------
+
+This tutorial can be converted into various formats.  To do so, you
+need to install Sphinx first.  On Debian/Ubuntu::
+
+  # sudo apt install python-sphinx
+
+Or, on Red Hat/Fedora/CentOS::
+
+  # sudo yum install python-sphinx
+
+Or use ``pip``::
+
+  # pip install sphinx
+
+After installation, run::
+
+  # make help
+
+to see the available conversion commands.  For example, to generate
+HTML, PDF, ePUB, manpage, and Texinfo documents respectively::
+
+  # make html
+  # make latexpdf
+  # make epub
+  # make man
+  # make texinfo
+
+Copyright |copy| 2017-2021 imacat, 2017-2018 National Taiwan Normal
+University, 2020-2021 Steps Inc.  This work is licensed under a
+`Creative Commons Attribution 4.0 International License`_.
+
+.. _Creative Commons Attribution 4.0 International License: http://creativecommons.org/licenses/by/4.0/
+
+.. |copy| unicode:: 0xA9 .. copyright sign

conf.py

@@ -1,430 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-# 台師大問卷調查平台LimeSurvey學習手冊 documentation build configuration file, created by
-# sphinx-quickstart on Wed Nov 15 15:39:50 2017.
-#
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#
-# import os
-# import sys
-# sys.path.insert(0, os.path.abspath('.'))
-
-# -- General configuration ------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#
-# needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-extensions = []
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix(es) of source filenames.
-# You can specify multiple suffix as a list of string:
-#
-# source_suffix = ['.rst', '.md']
-source_suffix = '.rst'
-
-# The encoding of source files.
-#
-# source_encoding = 'utf-8-sig'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = u'台師大問卷調查平台LimeSurvey學習手冊'
-copyright = u'2017-2018, 楊士青'
-author = u'楊士青 <imacat@ntnu.edu.tw>'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = u'3.0'
-# The full version, including alpha/beta/rc tags.
-release = u'3.0'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#
-# This is also used if you do content translation via gettext catalogs.
-# Usually you set "language" from the command line for these cases.
-language = 'zh_TW'
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#
-# today = ''
-#
-# Else, today_fmt is used as the format for a strftime call.
-#
-# today_fmt = '%B %d, %Y'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-# This patterns also effect to html_static_path and html_extra_path
-exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
-
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-#
-# default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#
-# add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#
-# add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#
-# show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-# modindex_common_prefix = []
-
-# If true, keep warnings as "system message" paragraphs in the built documents.
-# keep_warnings = False
-
-# If true, `todo` and `todoList` produce output, else they produce nothing.
-todo_include_todos = False
-
-
-# -- Options for HTML output ----------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-#
-html_theme = 'alabaster'
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#
-# html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-# html_theme_path = []
-
-# The name for this set of Sphinx documents.
-# "<project> v<release> documentation" by default.
-#
-# html_title = u'台師大問卷調查平台LimeSurvey學習手冊 v3.0'
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#
-# html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#
-# html_logo = None
-
-# The name of an image file (relative to this directory) to use as a favicon of
-# the docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#
-# html_favicon = None
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
-
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-#
-# html_extra_path = []
-
-# If not None, a 'Last updated on:' timestamp is inserted at every page
-# bottom, using the given strftime format.
-# The empty string is equivalent to '%b %d, %Y'.
-#
-# html_last_updated_fmt = None
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#
-# html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#
-# html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#
-# html_additional_pages = {}
-
-# If false, no module index is generated.
-#
-# html_domain_indices = True
-
-# If false, no index is generated.
-#
-# html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#
-# html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#
-html_show_sourcelink = False
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#
-# html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#
-# html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#
-# html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-# html_file_suffix = None
-
-# Language to be used for generating the HTML full-text search index.
-# Sphinx supports the following languages:
-#   'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja'
-#   'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr', 'zh'
-#
-# html_search_language = 'en'
-
-# A dictionary with options for the search language support, empty by default.
-# 'ja' uses this config value.
-# 'zh' user can custom change `jieba` dictionary path.
-#
-# html_search_options = {'type': 'default'}
-
-# The name of a javascript file (relative to the configuration directory) that
-# implements a search results scorer. If empty, the default will be used.
-#
-# html_search_scorer = 'scorer.js'
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'LimeSurveydoc'
-
-# -- Options for LaTeX output ---------------------------------------------
-
-latex_elements = {
-     # The paper size ('letterpaper' or 'a4paper').
-     #
-     # 'papersize': 'letterpaper',
-
-     # The font size ('10pt', '11pt' or '12pt').
-     #
-     # 'pointsize': '10pt',
-
-     # Additional stuff for the LaTeX preamble.
-     #
-     # 'preamble': '',
-     'preamble':u"""
-\\usepackage{xeCJK}
-\\setCJKmainfont{AR PL UMing TW}
-\\setCJKsansfont{AR PL UKai TW}
-""",
-
-     # Latex figure (float) alignment
-     #
-     # 'figure_align': 'htbp',
-     'figure_align': 'H',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-#  author, documentclass [howto, manual, or own class]).
-latex_documents = [
-    (master_doc, 'learning-limesurvey.tex', u'台師大問卷調查平台LimeSurvey學習手冊',
-     u'楊士青', 'manual'),
-]
-
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#
-# latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#
-# latex_use_parts = False
-
-# If true, show page references after internal links.
-#
-# latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#
-# latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#
-latex_appendices = ['apx-01-copy', 'apx-02-ab-testing']
-
-# It false, will not define \strong, \code, 	itleref, \crossref ... but only
-# \sphinxstrong, ..., \sphinxtitleref, ... To help avoid clash with user added
-# packages.
-#
-# latex_keep_old_macro_names = True
-
-# If false, no module index is generated.
-#
-# latex_domain_indices = True
-
-
-# -- Options for manual page output ---------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    (master_doc, 'learning-limesurvey', u'台師大問卷調查平台LimeSurvey學習手冊',
-     [author], 1)
-]
-
-# If true, show URL addresses after external links.
-#
-# man_show_urls = False
-
-
-# -- Options for Texinfo output -------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-    (master_doc, 'learning-limesurvey', u'台師大問卷調查平台LimeSurvey學習手冊',
-     author, 'Learning LimeSurvey', u'台師大問卷調查平台LimeSurvey學習手冊',
-     'Miscellaneous'),
-]
-
-# Documents to append as an appendix to all manuals.
-#
-# texinfo_appendices = []
-
-# If false, no module index is generated.
-#
-# texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#
-# texinfo_show_urls = 'footnote'
-
-# If true, do not generate a @detailmenu in the "Top" node's menu.
-#
-# texinfo_no_detailmenu = False
-
-
-# -- Options for Epub output ----------------------------------------------
-
-# Bibliographic Dublin Core info.
-epub_title = project
-epub_author = author
-epub_publisher = author
-epub_copyright = copyright
-
-# The basename for the epub file. It defaults to the project name.
-# epub_basename = project
-epub_basename = 'learning-limesurvey'
-
-# The HTML theme for the epub output. Since the default themes are not
-# optimized for small screen space, using the same theme for HTML and epub
-# output is usually not wise. This defaults to 'epub', a theme designed to save
-# visual space.
-#
-# epub_theme = 'epub'
-
-# The language of the text. It defaults to the language option
-# or 'en' if the language is not set.
-#
-# epub_language = ''
-
-# The scheme of the identifier. Typical schemes are ISBN or URL.
-# epub_scheme = ''
-
-# The unique identifier of the text. This can be a ISBN number
-# or the project homepage.
-#
-# epub_identifier = ''
-
-# A unique identification for the text.
-#
-# epub_uid = ''
-
-# A tuple containing the cover image and cover page html template filenames.
-#
-# epub_cover = ()
-
-# A sequence of (type, uri, title) tuples for the guide element of content.opf.
-#
-# epub_guide = ()
-
-# HTML files that should be inserted before the pages created by sphinx.
-# The format is a list of tuples containing the path and title.
-#
-# epub_pre_files = []
-
-# HTML files that should be inserted after the pages created by sphinx.
-# The format is a list of tuples containing the path and title.
-#
-# epub_post_files = []
-
-# A list of files that should not be packed into the epub file.
-epub_exclude_files = ['search.html']
-
-# The depth of the table of contents in toc.ncx.
-#
-# epub_tocdepth = 3
-
-# Allow duplicate toc entries.
-#
-# epub_tocdup = True
-
-# Choose between 'default' and 'includehidden'.
-#
-# epub_tocscope = 'default'
-
-# Fix unsupported image types using the Pillow.
-#
-# epub_fix_images = False
-
-# Scale large images.
-#
-# epub_max_image_width = 0
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#
-# epub_show_urls = 'inline'
-
-# If false, no index is generated.
-#
-# epub_use_index = True